Dental Technology at Our Kitchener Clinic

Digital X-rays with Vatech sensors and ScanX imaging, and iTero 3D scans of your teeth, at our Glasgow Street clinic.

Walk In The Park Family Dental in Kitchener uses two kinds of digital imaging. We take X-rays with Vatech digital sensors and the ScanX phosphor plate system, and we make 3D scans of your teeth with iTero intraoral scanners. Dr. Alison Midgley and Dr. Daniel Park, our general dentists, use these images to spot problems, show you what they see on screen and plan your care.

Many people feel uneasy about X-ray radiation, and plenty of adults still remember gagging on a tray of impression putty. This page explains what each tool does, what it feels like in the chair, and what the radiation numbers really are, so you know what to expect before your visit.

What dental technology do we use at our Kitchener clinic?

Our Kitchener clinic uses three pieces of digital equipment. Vatech sensors and the ScanX phosphor plate system take digital X-rays of your teeth and the bone around them. iTero intraoral scanners make a 3D model of the outside of your teeth and gums. Each tool answers a different question. Your dentist chooses based on what they need to see.

EquipmentWhat it doesWhere you will notice it
Vatech digital sensorsCaptures an X-ray and sends it straight to a computer screenCheckups, toothaches and many treatment visits
ScanX phosphor platesRecords an X-ray on a thin, flexible plate that the ScanX unit reads into a digital imageX-rays where a thin plate suits better than a sensor
iTero intraoral scannerBuilds a 3D model of your teeth and gums with a small handheld wandInvisalign planning, digital impressions and tracking progress

How do digital dental X-rays work?

A digital dental X-ray works like a film X-ray, except a digital receptor records the image instead of film. Our clinic uses two kinds of receptor, Vatech sensors and ScanX phosphor plates. Both turn the X-ray into a digital image your dentist can enlarge and adjust on a computer screen. There is no film to develop in chemicals. The image goes straight into your record.

Vatech digital sensors

A sensor is a small, firm pad connected to a computer. Your dentist places it in your mouth and takes the X-ray. The picture appears on the screen a moment later. Because the image is ready right away, your dentist can show it to you while you are still in the chair.

ScanX phosphor plates

A phosphor plate is thin and flexible, much like the film used in older dental X-rays. After the X-ray, the plate goes into the ScanX unit, which reads it and turns it into a digital image. Some people find a thin plate easier to hold in the mouth than a firmer sensor. Having both options lets your dentist pick the one that suits the X-ray and your mouth.

Are dental X-rays safe?

An intraoral dental X-ray gives a dose of about 0.005 mSv, according to the Canadian Nuclear Safety Commission. The same source puts the average yearly dose from natural background radiation in Canada at 1.8 mSv, and a typical cross-Canada flight at 0.02 mSv. Health Canada says the risk of harm from dental X-rays is generally low because the dose from each exposure is low.

Low risk is still a reason to take X-rays only when they help. At Walk In The Park Family Dental, we take X-rays only when your dentist needs a closer look at a tooth or the bone around it. Your dentist will tell you why you need an X-ray before taking it.

If you are pregnant or think you might be, tell your dentist before any X-ray. We can plan around it.

What can a dental X-ray show that an exam cannot?

A dental X-ray shows the parts of your mouth that your dentist cannot see by looking. Teeth sit tightly together, and roots sit inside bone. An exam with a mirror and a light shows only the surfaces. An X-ray lets your dentist check what is happening between teeth and below the gum line.

Your dentist may take an X-ray to look for any of these:

  • Decay between teeth, where a mirror cannot reach
  • Infection at the tip of a root
  • The level of bone that supports your teeth
  • Teeth that have not come in, such as wisdom teeth
  • How a filling, crown or root canal from the past is holding up

What is an iTero scan?

An iTero scan is a 3D digital model of your teeth and gums, made with a small wand that your dentist moves around your mouth. Align Technology, the company that makes Invisalign clear aligners, also makes our iTero intraoral scanners. The model builds on the screen as the wand moves, and your dentist can turn and zoom it to look at any tooth.

What an iTero scan feels like

The wand is about the size of an electric toothbrush handle. Your dentist scans one section at a time. You breathe normally through your nose. Raise a hand at any point to take a break. For many treatments, the scan replaces the tray of impression putty that some people find hard to tolerate.

What we use the 3D model for

Your dentist uses the iTero model to plan treatment and to track how your teeth change over time. If you are starting Invisalign, the scan is the first step in planning your aligners. Your dentist can compare later scans with the first one. That shows how your teeth are moving. The scans also serve as digital impressions for treatments such as crowns.

Which treatments use this technology?

Most visits to our Kitchener clinic involve at least one of these tools, but no single visit uses all of them. The table below matches common treatments with the equipment your dentist is most likely to use. Your own visit depends on what your dentist needs to see, so ask at your appointment if you are unsure why your dentist wants a scan or X-ray.

TreatmentEquipment your dentist may use
Checkups and cleaningsDigital X-rays when your dentist needs a closer look
Emergency dental care for a toothache or broken toothDigital X-rays to find the cause
Root canal treatmentDigital X-rays to see the root and the bone around it
Invisalign clear alignersiTero scans to plan treatment and track progress
Crowns and bridgesiTero scans as digital impressions, plus X-rays

Does Walk In The Park Family Dental have a 3D X-ray scanner?

No. Walk In The Park Family Dental does not have a cone-beam CT scanner, the machine that takes 3D X-rays of the jaw. The 3D models from our iTero scanners show the outside surface of your teeth and gums, not the bone underneath. Our digital X-rays are flat, two-dimensional images. If your treatment ever needs a 3D X-ray, your dentist will explain your options before you book anything.

Who looks at your X-rays and scans?

Dr. Alison Midgley and Dr. Daniel Park read the X-rays and scans taken at Walk In The Park Family Dental. Dr. Midgley earned her DDS at the University of Toronto in 2006 and holds RCDSO registration no. 68421. Dr. Park earned his DDS at Western University in 2020 and holds RCDSO registration no. 123704. Both are general dentists registered with the Royal College of Dental Surgeons of Ontario.

Your dentist goes over the images with you at the same visit. Ask about anything you see on the screen. A dark spot or a shadow can mean many things, and your dentist will explain what it means for your tooth.

What digital imaging means for your visit

Digital imaging changes a few practical things about a dental visit. Most of them are small, but they add up for patients who feel nervous in the chair or who want to understand their treatment before saying yes.

You see what your dentist sees

Your images appear on a screen in the room, not on a film held up to a light. Your dentist can zoom in on a cavity or a worn filling and point to exactly what they mean.

Fewer putty impressions

An iTero scan takes the place of the putty tray for many treatments, including Invisalign planning. Do you have a strong gag reflex? Mention it when you book. Your dentist can plan around it.

X-rays only when they help

Your dentist decides on X-rays based on your exam, not a fixed schedule. Nothing goes ahead without your agreement. You can always ask why you need an X-ray before your dentist takes it.

Frequently asked questions

Can I say no to dental X-rays?

Yes. You can decline any X-ray you do not want. Your dentist will explain why they recommend it and what they might miss without it, such as decay between teeth or an infection at the tip of a root. Nothing goes ahead without your agreement, and you can change your mind at a later visit.

Does an iTero scan use radiation?

No. An iTero scanner uses light to record the shape of your teeth and gums. It does not use X-rays, so a scan adds nothing to your radiation dose. Your dentist can repeat scans during Invisalign treatment to track progress. None of them involve X-rays.

Do I need new X-rays if I switch dentists?

Not always. Health Canada advises that a new dentist should try to get your previous X-rays rather than take new ones. If you are joining Walk In The Park Family Dental, ask your last dentist to send recent X-rays, or bring copies to your first visit. Our new patient guide lists what else to bring.

Book a visit at our Kitchener clinic

Walk In The Park Family Dental is at 890 Glasgow St Unit 6, Kitchener, ON N2N 3G6, Canada. The clinic is in the Highland West neighbourhood of Kitchener. Call (519) 743-1172 to book with Dr. Alison Midgley or Dr. Daniel Park, or book online. We stay open until 7:00 PM on Mondays, direct bill your insurance and accept the Canadian Dental Care Plan.

Questions about an X-ray or scan?

Call (519) 743-1172 and our team will explain what your dentist has planned.

Book an Appointment